Custom Parameter Option
SCU – Global Tab
Custom Parameter Option
LXE does not support the parameter Custom option. The parameter value is displayed as “Custom” when the operating system
registry has been edited to set the Summit parameter to a value that is not available from the parameter’s drop down list.
Selecting Custom from the drop down list has no effect. Selecting any other value from the drop down list will overwrite the
“custom” value in the registry.
Global Parameters
Parameter
Default
Function
RX
Diversity
BG radio:
On-start on
Main
A radio:
Main Only
How to handle antenna diversity when receiving packets from the Access Point.
Options are: Main Only (use the main antenna only), Aux Only (use the auxiliary antenna
only), On-start on Main (on startup, use the main antenna), or On-start on Aux (on startup, use
the auxiliary antenna).
The options for the RX Diversity parameter should be set, based on the antenna configuration, as follows:
Antenna Configuration
RX Diversity
A Main and BG Main
Main Only
A Main and A Aux
On Start On Main
BG Main and BG Aux
On Start On Main
Contact your
if you have questions about the antenna(s) installed on your MX8WM.
E-EQ-MX8WMRG-C [ 208 ] MX8WM Reference Guide
