32 key Alpha-Mode Keymap
32 key Alpha-Mode Keymap
l
The following
is used on an MX8WM that is NOT running an LXE Terminal Emulator. LXE terminal emulators
use a separate keymap.
l
When using a sequence of keys that require an alpha key, first press the Alph key. Use the Shft sticky key for upper
case alphabetic characters.
l
Tapping the Power key when in any sticky mode (Blue, Orange, Shift, etc) either turns the device On (when Off) or
places it in Suspend (when active).
l
Pressing the Alph key locks the keypad into alpha mode. Pressing Alph a second time toggles alpha mode off.
l
To create a combination of numbers and letters before pressing Enter, remember to tap the Alph key to toggle between
Alpha and Numeric mode.
l
Since letters are mapped to Alt, Ctl, Shft, these modifiers must be pressed before Alph. For example, for Alt T, press
Alt, then Alph, then Alt again.
l
When using a sequence of keys that do not include the Alph key but does include a sticky key, press the sticky key first
then the rest of the key sequence.
l
For those keymaps that require remapping (MAP), keys can be remapped using the Buttons Panel (Start | Settings |
Personal | Buttons).
To get this Key / Function
Press these Keys in this Order
Power / Suspend
Power
Field Exit
(default is VK_PAUSE)
MAP = Mappable
Blue (MAP)
Shft (MAP)
Diamond #1
=
Orange
Shft (MAP)
Diamond#2
Default is Mappable
(
Blue
Shft (MAP)
Diamond#2
Default is Mappable
!
Orange
Shft (MAP)
Diamond#3
Default is Mappable
)
Blue
Shft (MAP)
Diamond#3
Default is Mappable
Volume Adjust Mode
Orange
Scan
Up Arrow
Down Arrow
Display Backlight Brightness
Adjust Mode
Blue
Scan
Up Arrow
Down Arrow
Toggle Alpha Mode
Alph
Toggle Blue Mode
Blue
Toggle Orange Mode
Orange
Toggle Shift Mode
Shft
Alt Mode
Alt
E-EQ-MX8WMRG-C [ 246 ] MX8WM Reference Guide
