132
Installation Procedure, LXE Model 6540 AP (RoHS)
NEMA Type 4 Enclosure Reference Guide
E-EQ-NEMARG-F
159084-0001-R Rev. A
Page 6 of 8
16. Bundle the loose cord up and secure it with an 8” nylon cable tie. See figure
8.
17. Obtain a female power cord (Supplied Locally)
18. Plug the cord into the power transformer and route it to the terminal block.
19. Cut the cord and remove at least 2” inches of the outer covering from the cut
end of the cord. See figure 9.
20. Remove 0.4” (10 mm) of the insulation from each conductor.
Figure 9
2”
Figure 8
