76
Installation Procedure, LXE Model 6730 AP (non-RoHS)
NEMA Type 4 Enclosure Reference Guide
E-EQ-NEMARG-F
159088-0001 Rev. C
Page 8 of 14
16. Install power brick
Model ADP-18PB
.
17. Remove the screw from the upper left corner of the Mounting Plate. See
figure 6.
18. Position bracket 160042-0001 in the upper area of the enclosure. See figure 9.
19. Secure the bracket with four (4) 6-32 x 5/16” long screws and the one that was
removed form the Mounting Plate earlier.
20. Remove the adhesive backing and apply two (2) of the Foam Pads to Bracket,
160042-0001, as shown in figure 9. Discard the remaining Foam Pad.
21. Position the AC Power Brick over the Foam Pads with the AC input pointing
towards the bottom of the box. See figure 10.
22. Place bracket 160043-0001 over the Power Brick. See figure 11.
Figure 9
Figure 10
