LX 7007
pro IGC V1.0
Apr.2005
Page 34
If an incorrect letter is entered, then either press
START
or rotate the
ZOOM
selector to move the cursor back so that
the letter can be re-entered.
If the ICAO locator is unknown, then the following method should be used. With the cursor on
ICAO
, press
ESC
to
move the cursor to the country. Select the required country with the
UP/DOWN
selector and press
ENTER
. Four
stars will now be displayed at the airport name. Using the
UP/DOWN
selector and
ENTER
, input the first four letters
of the airport name. All airports with the same first four letters will be available and can be cycled through by use of
the
UP/DOWN
.
If you input less than four characters, the number of airports that fit the first x letters will be greater. If all four stars are
confirmed with
ENTER
or after pressing
ESC,
all airports of the selected state are available and can be cycled through
in alphabetical order.
2.2.3.2.2
TEAM function
This special function has been developed to help pilots flying in a team to locate each other if they loose visual contact.
Both pilots have to select the same destination point (APT, TP or TSK). One pilot then passes his range and bearing to
the selected point by radio. The second pilot then selects TEAM FUNCTION and enters the range and bearing passed
by the first pilot.
Example:
If 347
°
and 24.1 km is the range and bearing given by the first pilot. After entering the figures and pressing ESC, the
instrument will change to the normal
TP navigation page
and the data will show the position of the first pilot.
The team function is deactivated
after a new APT or TP
is selected.
2.2.3.2.3
WIND calculation
The LX 7007 PRO IGC is able to calculate the wind vector. This function is the same in all three navigation modes. A
further method, COMPASS, is available only after an optional compass unit is connected to the LX 7007 PRO IGC
RS485-bus. To change the method of wind calculation, use the the following menu:
Input
Navigation toward companion