LXNAV CAN Remote Installation Manual Version 1.1
April 2018
Page
8 of 9
6
Remote without SC cable
We have been working very hard to simplify the remote stick so that we can have the same
functionality but use fewer cables. The LXNAV new remote stick comes without the standard
SC cable but the functionality is still available.
With the new stick, there is no more need to solder these wires to the vario wiring loom. The
SC function is programmable through S8/80/S10/S100.
To make the SC function work with the new stick, please check the SC setting in the
configuration/setup page. Go to
Setup->Hardware->Digital inputs
Please make sure that NONE of input is set to
“SC on/off switch” or
"SC toggle button".
