background image

FlarmACL Version 1.15 

 

August 2018 

 

Page 3 of 8 

1

 

Important Notices 

The LXNAV FlarmACL system is designed for VFR use only. All information is presented for 

reference only.  It is ultimately the pilot's responsibility to ensure the aircraft is being flown 

in accordance with the manufacturer's aircraft flight manual.  The FlarmACL must be 

installed in accordance with applicable airworthiness standards according to the country of 

registration of the aircraft.

 

 

Information in this document is subject to change without notice.  LXNAV reserves the right 

to change or improve their products and to make changes in the content of this material 

without obligation to notify any person or organisation of such changes or improvements. 

 

A Yellow triangle is shown for parts of the manual which should be read carefully 

and are important for operating the LXNAV FlarmACL system. 

 

Notes with a red triangle describe procedures that are critical and may result in 

loss of data or any other critical situation. 

 

A bulb icon is shown when a useful hint is provided to the reader. 

1.1

 

Limited Warranty 

This LXNAV FlarmACL product is warranted to be free from defects in materials or 

workmanship for two years from the date of purchase.  Within this period, LXNAV will, at its 

sole option, repair or replace any components that fail in normal use.  Such repairs or 

replacement will be made at no charge to the customer for parts and labour, the customer 

shall be responsible for any transportation cost.  This warranty does not cover failures due to 

abuse, misuse, accident, or unauthorised alterations or repairs. 

 

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF 

ALL OTHER WARRANTIES EXPRESSED OR IMPLIED OR STATUTORY, INCLUDING ANY 

LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.  THIS WARRANTY GIVES YOU 

SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE. 

 

IN NO EVENT SHALL LXNAV BE LIABLE  FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR 

CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR 

INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.  Some states do 

not allow the exclusion of incidental or consequential damages, so the above limitations may 

not apply to you.  LXNAV retains the exclusive right to repair or replace the unit or software, 

or to offer a full refund of the purchase price, at its sole discretion.  SUCH REMEDY SHALL 

BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. 

 

To obtain warranty service, contact your local LXNAV dealer or contact LXNAV directly. 

 

 

March 2018  

© 2018 LXNAV. All rights reserved. 

 

Summary of Contents for FlarmACL









Reviews: