Rev #5
Version 1.01
July
2020
Page
14
of
34
4.5.4
Slider selector
Some values like volume and brightness are displayed as a slider. Push
the
rotary knob to
activate the slider control, then rotate it to set the value.
4.6
Start-up procedure
After the device is powered on you, will immediately see the LXNAV logo. Underneath you
will find information about the bootloader and the application version. After a moment this
screen will disappear, and device will be at normal operation mode. It will start receiving
FLARM information after about 8 seconds after the power is turned on.
4.7
Operating Modes
LXNAV TrafficView has four operating pages. The main radar screen with different zoom
levels, Flarm traffic list and Setting Page. The fourth page (
Flarm watch
) is displayed
automatically if Flarm detects a potential collision situation and issues a warning.