INSTRUCTION MANUAL
Video Camera Auto-Track Conference System
In modern society, the request of conference is not just limited on the simple sound, but also requests the
music, video backup records or remote transmission, this system is designed for meeting this kind of
requests. This system can implement connection between the speaking and photography to implement the
automatic tracking location photography function. This system easy to operate, setting the photography spot
through using the software, and it can also set the spot without the computer, so that to enhance the
flexibility for using and save the cost.
Function of Video Processor
1.
Built-in video switching matrixes (4 inputs, 1 outputs).
2.
256 video camera auto-track control points. Multi-machine cascade
3.
Support Pelco-D and VISCA protocol. (Pelco-D, Baud Rate: 9600, VISCA, Baud Rate:9600)
4.
The processor can communicate with the equipment by RS232 interface, such computer or video
switching matrixes.
5. High speed dome follows the location for last opening of all speaking representative, when the
microphone which opened last was closed, the dome will follow back the last following camera spot,
and when all the speaking representative microphone were closed, the dome will automatically move
back to the standby position.
6. When without the computer, set the camera spot advanced through pressing the button in main unit
board, and also set by the IR remote controller.
Schematic diagram:
1. Power switch
2. Camera number selecting button (VIDICON 1-8), send the photography to the related display screen
through pressing this button (HD processor only support 4 camera MAX)
3. Processor power indicative lamp
4. Busy indicative lamp
5. Camera selecting indicative lamp
6.
Zoom setting
