background image

475 Smith Street

Middletown, CT 06457

860-632-2020

www.lymanproducts.com

_____________________________

Benn Langlais, Quality Assurance Manager

Lyman

®

WARRANTY/REPAIR POLICY

Your Lyman Product has been produced under rigid standards of manu-

facture and inspection. However, if your Lyman product is found to be de-

fective in material or workmanship within one year of delivery to the first 

retail purchaser, we will repair or replace it without charge.
If you require service under this warranty, please return the complete 

item along with a letter of explanation, including your complete name and 

address, freight prepaid to the factory at the address listed below. Your 

Lyman product will be repaired or replaced and returned to you within 

30 days of our receipt. In making any return of a Lyman product to the 

factory, please be sure it is packaged with proper care to protect it from 

damage in transit.
We are sorry, but our warranty cannot apply to a defect which results 

from misuse, abuse, neglect, accident or improper care, or if your Lyman 

product has been altered or repaired by anyone other than factory per-

sonnel.
If the item is out of warranty and is in need of repairs, the Lyman product 

should also be returned to the same address listed below. Appropriate 

charges will apply for parts and labor. Estimates are available only when 

the item has been thoroughly inspected by our repair personnel.

Lyman Products Corporation

475 Smith Street, Middletown, CT 06457

Attn: Service Department

Summary of Contents for CYCLONE ROTARY TUMBLER













Reviews: