background image

- 1 -

The Lyman Cyclone Rotary Tumbler takes brass cleaning to a whole new 

level. The rotary tumbling action combined with the stainless steel media and 

liquid cleaning solution gets brass cleaner on the outside than vibratory tum-

bling methods. The small stainless pins easily slip inside cases and into primer 

pockets to provide superior cleaning action in these areas. Something that vi-

bratory tumblers will not do! The large capacity drum holds up to 1000 pieces 

of .223 brass and features a rubber lining to protect brass and greatly reduce 

noise during operation.

Specifications

• Voltage - 230V, 120V +/-10%
• Frequency - 50 Hz
• Operating Current – 0.65A, 1.5A
• FLA – 0.90A, 2.1A
• Power – 80 watts
• Weight of unit – 
• Maximum Load in barrel – 13.61kg (30 pounds)
• Speed of barrel – 60 RPM
• Timer Intervals – 1 minute to 180 minutes infinitely adjustable

NOISE and VIBRATION INFORMATION
A weighted sound pressure LpA: 56 dB (A)
A weighted sound power LwA: 67 dB (A)
KpA&KwA: 3.0 dB (A)

Wear ear protection when sound pressure is over: 80dB (A)
The total vibration value is not exceeding 2.5m

Contents

Tumbler drum 
Tumbler end cap
Motor base unit
2 sifter pans - 1 large screen and 1 fine screen
2.27kg (5 lbs.) of stainless steel media pins
Sample packet of cleaning solution

Lyman Product’s Cyclone Rotary Tumbler Instructions Manual

Summary of Contents for CYCLONE ROTARY TUMBLER













Reviews: