- 4 -
factory authorized service facility.
29. Inspect extension cords periodically and replace if damaged.
30. Keep handles dry, clean and free from oil and grease.
31.
Disconnect tools
a. When not in use, before servicing and when changing accessories
such
as blades, bits and cutters, disconnect tools from the power supply.
32. Remove adjusting keys and wrenches
a. Form the habit of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
33. Avoid unintentional starting
a. Ensure switch is in “off” position when plugging in
34. Use of outdoor extension leads
a. When the tool is used outdoors, use only extension cords intended for
outdoor use and so marked.
35. Stay alert
a. Watch what you are doing, use common sense and do not operate the
tool when you are tired.
36. Check damaged parts
a. Before further use of tool, it should be carefully checked to determine
that it will operate properly and perform its intended function.
b.
Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may affect
its operation.
c. A guard or other part that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise indicated in this
instruction manual.
d. Have defective switches replaced by an authorized service center.
e. Do not use the tool if the switch does not turn it on and off.
!! Warning !!
1. The use of any accessory or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
2. Have your tool repaired by a qualified person
Lyman Product’s Cyclone Rotary Tumbler Instructions Manual