Lyngdorf Audio CD-1, Owner'S Manual

8

Front Panel

Controls

The buttons/controls on the front panel of the CD-1 can all be operated either with direct presses or by 

operating the corresponding keys on the supplied remote control. All the keys on the front panel [except 

the Mains switch (1)] are duplicated on the remote control as well.

Additional buttons on the remote control include the following: Random, Repeat, A/B and the digits 0-9. 

Please note the left < and right > arrows in the center button area of the remote control work exactly like 

the Skip/Search buttons |<< / >>| on the front panel.  The Play/Pause buttons and the Enter button also 

work in exactly the same way.

1. Mains 

switch 

Powers the CD-1 On/Off

2.    Standby button  

Standby mode, this can also be selected on the remote control.

3.    Eject 

The CD Loader Tray can be opened and closed using the eject button. If the button is pressed during play 

mode, the disc will be stopped before the tray is opened.

4.    The CD Loader Tray

While the tray is opened pressing play will cause the tray to close and start playback. Selecting a track 

with the digits on the remote control will also close the tray and start playback at the selected track.

5.    Indicator light  

Power on indicator LED.

6.    Play/Pause 

Pressing the Play/Pause button or the Skip-Wheel (11 & 12 see below instructions) will start playing the 

CD. Pressing the button again will toggle between Play mode and Pause mode.

You can select a new track with the skip buttons, the Skip-Wheel (11 & 12 see below instructions) or 

directly with digits during pause mode.  This will cause the CD-1 to position itself at the start of the se-

lected track but it remains in Pause mode until the Play/Pause button is pressed again.

7.    Stop

Pressing stop during play or pause mode will stop the CD.

In menu mode used for navigation in the menu system: Up/Down, Left/Right & Enter.