NEXT
STEP 5: Cable Installation
Connect L22 breakout cables to the Audio Port and Sync Port as shown below. Signals are assigned as follows:
Audio Port
provides connections for all analog audio I/O
Sync Port
provides connections for digital I/O and clock I/O
IN 1
CABLE LABELS
ANALOG IN 1
AUDIO PORT
SYNC PORT
L22
CBL-L22AUDIO
CBL-L22SYNC
ANALOG IN 2
WORD CLOCK OUT
CLOCK IN
AES/EBU, S/PDIF IN
AES/EBU, S/PDIF OUT
ANALOG OUT 1
ANALOG OUT 2
IN 2
DIGITAL IN
OUT 1
OUT 2
DIGITAL OUT
SYNC IN
CLOCK OUT
QUICK START GUIDE
Thank you for purchasing the L22 from Lynx Studio Technology. This document will guide you through the
installation process in a few easy steps. For more detailed information refer to the complete L22 manual
which is included on the installation CD in PDF format.
Check the contents of the shipping carton. It should include the following:
L22 PCI Card in anti-static bag
L22 Audio Cable – P/N CBL-L22AUDIO with 4 XLR connectors
L22 Sync Cable – P/N CBL-L22SYNC with 2 BNC and 2 XLR connectors
Male and female S/PDIF adapter cables
Installation CD and Registration Card
Accessory cables available from Lynx
CBL-ICC: Internal Clock Cable used to sync multiple L22’s internally
TRS and RCA adapter cables used to adapt from XLR connectors on the L22 Audio Cable
Requirements
Windows PC or Macintosh with an empty PCI Slot, CDROM drive, and third party audio software
Phillips screwdriver (if necessary for securing PCI card bracket)
Support
If you have questions or comments regarding the operation of your L22 please check the “Troubleshooting” section of
the manual and the FAQ and Troubleshooting topics on the support section of the Lynx web site at:
http://www.lynxstudio.com/support.html
