CXA Series
User Manual
Lynx Pro Audio S.L
12
www.lynxproaudio.com
CONFIGURING THE CABINET DSP OPTIONS
From the buttons below the display on the CXA back pannels you are able to configure the basic adjustment
functions of the internal DSP of the cabinets.
Note:
You must apply the desired configuration in each cabinet and requires electrical power to work.
CONFIGURATION PANEL
On the back panel you will see 3 buttons and an information screen, on which you can read the established
parameters and information such as amplification module temperature, input signal level and name of the
current preset (Fig1).
If changes are not made the display will automatically dim to save energy and avoid unnecessary light in
situations where light is not wanted. To re-activate the light simply press the OK button.
Fig 1
SELECT AND RUN PRESET
To change the preset configuration (see Fig 2) just press the up button (1) and down button (2) until you see
the title and present number required and once found press OK (3) until the progress bar finishes (Fig 3).
The display will indicate “Loading DSP” (Fig 4).
Fig 3
Fig 4
1 2 3
Fig 2
Note:
In case of a power cut, the DSP will save its last configuration when restarted.
