CXA Series
User Manual
Lynx Pro Audio S.L
25
www.lynxproaudio.com
THE CEILING BRACKET
• The UBR-CXA12 is a ceiling mounting system specially designed for CXA-12 cabinets. It is composed by
the U type support made of steel, two lateral plates including 2 screws (DIN 7991 5x50) per plate and 4
fixing points (2 per side) to fix the U support to the cabinet.
U type support
Fixing points
Special lateral plate
and 2 screws 5x50
• How to use it?
First, fix the U type support in your ceiling. Then you have to mount a lateral plate in each side of the cabinet,
where you will find 3 screws aligned.
Lateral plate
Just unscrew the upper and lower screws
(don’t touch the center screw) and retire
these 2 screws from the cabinet. In their
place you have to insert the screws
DIN7991 5x50 (longer) provided with
the UBR-CXA12 mounting kit.
You can fix the lateral plate using the
new screws. Fix one plate in each side of
the cabinet, in the position shown in the
drawing.
Once the lateral plates are fixed you have
to insert the knob into the upper hole of
the plate. This will help you to connect
the cabinet with the U type support.
