37
DSX
4 - EDITING WITH DSX
By clicking on buttons and sliders, you can access the configuration of each
Dynamic
, showing all the
parameters (threshold, compression ratio, knee, Release time, etc.).. In the left chart it shows the dynamic
curve that expresses the relationship between the level of input in dBu and output. If you do not want the
dynamic active, you can press the button "
Bypass
" to disable this function.
The adjustment of the parameters of the dynamics will be vital for the safety of the loudspeakers. Not
only point threshold, but also the
Hold Time
and
Release
, because depending on these parameters more or
less peaks will be passing on the threshold.
RMS Compression and Limitation.
Through the use of compressors and limiters, we are looking to modify the dynamics of the signal.
We will use compressors to reduce the dynamic range from a certain threshold, and limiters for not letting the
signal pass a pre established level.
The performance of compressors and limiters are described with these graphics, which relates the level
of output according to the level of input signal.
These curves are presented as follows:
Limiter
Compressor 1:2
O
u
tp
u
t L
e
v
e
l
dB
dB
dB
dB
limit
threshold
O
u
tp
u
t L
e
v
e
l
Input Level
Input Level
Summary of Contents for DSX-1004
Page 1: ...Valencia Spain www lynxproaudio com USER MANUAL V 11 08 DSX ...
Page 61: ......
