Lynx NGT-9000s
Installation Manual
A.2.5 RS-232 Interface
The RS-232 is a serial interface used to receive and transmit altitude data, interface with Control Panel,
and interface with Wi-Fi Device. The altitude data and Wi-Fi are optional depending on the installation.
A.2.5.1 RS-232 WiFi Output
The RS-232 WiFi interface is optional. An optional equipment interface wiring diagram is shown in
Figure A-1. When configured the NGT-9000 outputs the following information to a WiFi connection:
•
FIS-B Weather Data
•
ADS-B Traffic Data
•
Ownship Data
A.2.5.1.1 Compatible PED Interconnect Layout
Figure A-1 provides interconnect information for the RN370M PED Accessory.
Figure A-1: RN370M Interconnect Option for RS-232 to WiFi Converter
Page A-2
Appendix A
0040-17001-01
January 15, 2015
Revision A
