Lynx NGT-9000s
Installation Manual
A.2.8 ARINC 429 Output
The unit has one ARINC 429 Output that transmits data at high (100 kbps). The Lynx NGT-9000s have
the option of interfacing to the Traffic display over the ARINC 429 bus using the standard traffic display
(STIF) format as defined in ARINC 735 and the Display Traffic Information File (DTIF) as described in
ARINC 735B. The specific display format is configurable through the DCM.
NOTE
The Lynx NGT-9000s follows the same STIF display as the L-3 SKY-
497 TAS system. Select that option (if available) in the STIF display
configuration settings.
A.2.8.1 ARINC 429 Output Labels
The following ARINC 429 labels are output to a Traffic Display on Bus #1:
•
Label 013 - TCAS Display Control (DSC)
•
Label 015 - Altitude Select Limits (DSC)
•
Label 016 - Mode S Control Panel Data (DSC)
•
Label 163 - Application Availability (DSC)
•
Label 270 - Vertical Resolution Advisories (DSC)
•
Label 274 - Selected Sensitivity Level (DSC)
•
Label 350 - TCAS Fault Summary (DSC)
•
Label 371 - GA Equipment ID (DSC)
•
Label 377 - Equipment ID (DSC)
•
Label 110 - Own Aircraft Latitude - Coarse (BNR)
•
Label 111 - Own Aircraft Longitude - Coarse (BNR)
•
Label 120 - Own Aircraft Latitude - Fine (BNR)
•
Label 121 - Own Aircraft Longitude - Fine (BNR)
•
Label 203 – Own Aircraft Barometric Altitude (Uncorrected) (BNR)
•
Label 310 - Own Aircraft Latitude - Coarse (BNR)
•
Label 311 - Own Aircraft Longitude - Coarse (BNR)
•
Label 312 - Own Aircraft Ground Speed (BNR)
•
Label 313 - Own Aircraft True Track Angle (BNR)
•
Label 314 - Own Aircraft True Heading (BNR)
•
Label 320 - Own Aircraft Magnetic Heading (BNR)
•
Standard TCAS Intruder File (when enabled)
•
Display Traffic Information File (when enabled)
0040-17001-01
Appendix A
Page A-5
Revision A
January 15, 2015
