Lynx NGT-9000s
Installation Manual
[J1 connector] (Continued)
PIN 58
Signal Name:
Spare
Signal Function:
Spare pin
Electrical Characteristics:
---
Connection:
No Connection
Comments:
PIN 59
Signal Name:
Spare
Signal Function:
Spare pin
Electrical Characteristics:
---
Connection:
No Connection
Comments:
PIN 60
Signal Name:
RS232_RX3
Signal Function:
Altitude Encoder RS-232 RX (Encoder Input)
Electrical Characteristics:
Data bits (configuration option) 7 or 8, Parity none, Stop
bit 1, Start bit 1, Data format is ASCII, Flow control is
none. Baud Rate: (configuration option) 1200, 2400,
4800, 9600, 12000, 19200, 28800, 38400, 57600, or
115200 bps. Depending on the equipment manufacturer
and selected in the DCM.
Connection:
Optional. 24 AWG twisted shielded pair wire
Comments:
See paragraph A.2.5.2
PIN 61
Signal Name:
RS232_RX1
Signal Function:
RS-232 Control Panel Interface
Electrical Characteristics:
Data bits 8, Parity none, Stop bit 1, Start bit 1, Data
format is ASCII, Flow control is none.
Baud Rate: (configuration option) 1200, 2400, or 9600
bps. Depending on the equipment manufacturer
Connection:
Optional. 24 AWG twisted shielded pair wire
Comments:
See paragraph A.2.5.2
PIN 62
Signal Name:
RS232_TX1
Signal Function:
RS-232 Control Panel Interface
Electrical Characteristics:
Data bits 8, Parity none, Stop bit 1, Start bit 1, Data
format is ASCII, Flow control is none.
Baud Rate: (configuration option) 1200, 2400, or 9600
bps. Depending on the equipment manufacturer
Connection:
Optional. 24 AWG twisted shielded pair wire
Comments:
See paragraph A.2.5.2
0040-17001-01
Appendix A
Page A-21
Revision A
January 15, 2015