P AR 5610 Reference Manual. Rev 1.1
Page 34 of 35
Specifications
Video Inputs
Signal Type
Serial digital video SMPTE 292M, 344M, 259M-C
Input standards
HDTV: 1080i 59.94Hz / 60Hz / 50Hz /
720P 59.94Hz / 60Hz / 50Hz
SDTV: 525 59.94Hz / 625 50Hz.
(Upgradeable if additional format support is released)
No. of inputs
1 input
Connector
BNC
Impedance
75 Ohm
Cable Equalization
Up to 250m Belden 8281 (270MHz)
Up to 140m Belden 1694A (1.485GHz)
Return Loss
> 15 dB (270MHz)
> 10dB (1.485GHz)
Video Outputs
Signal Type
Serial digital video SMPTE 292M, 344M, 259M-C
Output standards
1080i 59.94Hz / 60Hz / 50Hz
720P 59.94Hz / 60Hz / 50Hz
525 59.94Hz / 625 50Hz.
No. Of outputs
2 separate outputs with 2 x SDI out of each output (4 total)
(mapped to any available internal resource)
Connector
BNC
Impedance
75 Ohms
Jitter
< 0.2 ui (270MHz) < 0.25 ui (1.485GHz)
Return Loss
> 15 dB (1.5GHz)
Video Processing
Delay adjustment range
Up to 12 frames of programmable delay in pixel / line / frame increments. Independent for all 2
outputs
(optional)
Minimum delay
Variable, depending on selected functionality and installed options. Please refer to “Fixed
Video Delays” table in this manual
Video adjustments
Gain / Saturation / Hue / Black Level
Aperture correction
Horizontal only, adjustable for each output channel (2)
Color space conversion
601 > 709 or 709 > 601 or transparent (selectable)
Note.
Requires conversion option
Control
Local Controls
Local alphanumeric display with integrated menu system for setting
“basic” module
parameters.
Remote Control
Comprehensive remote control and status monitoring supported when used with a LYNX
Controller option.
The use of the control system is mandated for this module
External GPI
Single GPI input on BNC connector. GPI influence configured in control system.
Electrical Specifications
Operating Voltage
12 VDC
Power Consumption
16 W
Safety
IEC 60950/ EN 60950/ VDE 0805
Mechanical
Size
283mm x 78mm
Weight
CardModule 160g, connector plate 100g
Rack space
Requires 2 slots in rack frame (max 5 modules per frame)
Ambient
Temperature
5°C to 40°C Maintaining specifications
Humidity
90% Max non condensing
