Reference Manual P MX 3214 Version3.1
Page 13
!
Installation
Mechanical
Stand Alone Operation
The P MX 3214 MiniModule can be used in a stand
alone application. There are two options for the use
of the module in this way.
a)
Using the R FR 3005 Rack Frame 1 option. This
allows up to any 10 of the MiniModules to be
secured onto a rack frame assembly for 19 inch
rack mounting. This keeps the modules secured,
organized and out of the way. The R PS 1 power
brick option or the R FR 3010 option is required
to power each module. Please refer to the R FR
3005 Reference Manual supplied with this
option for more details.
b)
Single Use. The MiniModule can be powered
independently with the R PS 3001 option and
used in any location where this functionality is
required.
Caution.
Care needs to be taken
when using the module in this way, as
it is not physically secured. Keep the
module away from the floor to avoid
the risk of someone stepping or
tripping on the unit, and locate the
unit away from excessive sources of
heat and any sources or moisture.
If using more than one MiniModule in any
installation, the R FR 3005/3010 Rack frame
combination is highly recommended.
Summary of Contents for P MX 3214 B
