Reference Manual P MX 3214 Version3.1
Page 21
Alarm/LED Status Indicators
The P MX 3214 module has built in LED indicators,
which serve as alarm and status indication for the
module. Function is described below. The Indicators
are found on the bottom of the module and can
be seen through the access holes provided. (Figure
2 or 3)
LED Indicators
2 channel Status LED are provided per embedder
on the module edge and can be seen through the
access holes (figures 2 or 3). One LED is provided for
the audio signals, and one for indication of the SDI
status. Both LEDs are three color, and have several
indication states.
LED COLOR
INDICATION
GREEN
AES1/3 and AES 2/4 present, no error
YELLOW AES 1/3or AES 2/4 missing
Status
LED
1/3
RED
AES 1/3 and AES 2/4 signal missing
GREEN
SDI input present, no error
YELLOW SDI input present, PLL not locked
Status
LED
2/4
RED
SDI input missing
*Note
When working in 525 mode with 24 Bit audio
selected then only the first three groups can be
embedded. Group 4 is locked. In 525 mode with
20-bit audio all four groups are accessible.
Summary of Contents for P MX 3214 B
