background image

Reference Manual P MX 3214  Version3.1

 

 

Page 3  

 

Warranty 

 

LYNX Technik AG warrants that the product will be free from 
defects in materials and workmanship for a period of two (2) 

years from the date of shipment. If this product proves defective 
during the warranty period, LYNX Technik AG at its option will 

either repair the defective product without charge for parts and 
labor, or will provide a replacement in exchange for the 
defective product. 
 

In order to obtain service under this warranty, customer must 
notify LYNX Technik of the defect before expiration of the 
warranty period and make suitable arrangements for the 
performance of service. Customer shall be responsible for 

packaging and shipping the defective product to the service 
center designated by LYNX Technik, with shipping charges 
prepaid. LYNX Technik shall pay for the return of the product to 
the customer if the shipment is within the country which the LYNX 

Technik service center is located. Customer shall be responsible 
for payment of all shipping charges, duties, taxes and any other 
charges for products returned to any other locations. 
 
This warranty shall not apply to any defect, failure, or damage 

caused by improper use or improper or inadequate 
maintenance and care. LYNX Technik shall not be obligated to 
furnish service under this warranty a) to repair damage resulting 
from attempts by personnel other than LYNX Technik 

representatives to install, repair or service the product; b) to 
repair damage resulting from improper use or connection to 
incompatible equipment; c) to repair any damage or 
malfunction caused by the use of non LYNX Technik supplies; or 

d) to service a product which has been modified or integrated 
with other products when the effect of such modification or 
integration increases the time or difficulty servicing the product. 
 

THIS WARRANTY IS GIVEN BY LYNX TECHNIK WITH RESPECT TO THIS 
PRODUCT IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR 

IMPLIED. LYNX TECHNIK AND ITS VENDORS DISCLAIM ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. LYNX TECHNIK`S RESPONISIBILITY TO REPAIR AND 
REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE 

REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS 
WARRANTY. LYNX TECHNIK AND ITS VENDORS WILL NOT BE LIABLE 
FOR ANY INDIRECT, SPECIAL, INCIDENTIAL, OR CONSEQUENTIAL 

DAMAGES IRRESPECTIVE OF WHETHER LYNX TECHNIK OR THE 
VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH 
DAMAGES. 

Summary of Contents for P MX 3214 B































Reviews: