Reference Manual P MX 3312/3313 D Version1.3
Page 13
!
Installation
Mechanical
Stand Alone Operation
The P MX 3312/3313 D MiniModule can be used in a
stand alone application. There are two options for
the use of the module in this way.
a)
Using the R FR 3005 Rack Frame 1 option. This
allows up to any 10 of the MiniModules to be
secured onto a rack frame assembly for 19 inch
rack mounting. This keeps the modules secured,
organized and out of the way. The R PS 3001
power brick option or the R FR 3010 option is
required to power each module. Please refer to
the R FR 3005 Reference Manual supplied with
this option for more details.
b)
Single Use. The MiniModule can be powered
independently with the R PS 3001 option and
used in any location where this functionality is
required.
Caution.
Care needs to be taken
when using the module in this way, as
it is not physically secured. Keep the
module away from the floor to avoid
the risk of someone stepping or
tripping on the unit, and locate the
unit away from excessive sources of
heat and any sources or moisture.
If using more than one MiniModule in any
installation, the R FR 3005/3010 Rack frame
combination is highly recommended.
Summary of Contents for P MX 3312 D
Page 6: ...Reference Manual P MX 3312 3313 D Version1 3 Page 6 This Page is intentionally left blank...
Page 10: ...Reference Manual P MX 3312 3313 D Version1 3 Page 10 Figure 2 Module Layout...
Page 29: ...Reference Manual P MX 3312 3313 D Version1 3 Page 29 This Page is intentionally left blank...
Page 30: ...Reference Manual P MX 3312 3313 D Version1 3 Page 30 Notes...
