3
7. DESS pilot light
If this light flashes, you are using a wrong type of cord or the connection is bad.
Remove the cap, clean it and reinstall it. If the cord is correct and the cap is clean
but the light is still on, contact an authorised Lynx service workshop.
8. Brake pilot light
This light comes on when the brake is pressed or when the parking brake is
engaged.
NOTE
: The electric fuel gauge and temperature gauge are optional on 4-TEC
models. See description or numbered items in
2003 Owner’s Manual
except for
the following:
(QJLQHFXWRXWVZLWFK
This push-pull type switch is located on the right side of the handlebar. To stop the
engine, push the button to the lower position (OFF) and simultaneously apply the
brakes. To restart, button must be at the upper position (ON).
NOTE.: When shutting-off engine with the engine cut-out switch, all instruments
will keep functionning for 30 seconds before auto-shut off.
A30E03A
2
1
7\SLFDO
21
2))
