diameter 600mm
•
Honey extractor’s weight – 21 kg
diameter
500 mm
Legs and beam ate powder-coated
Components of the honey extractor
with electric drive:
Drum with the engine installed
Assembling elements (list below)
Lid (2 pcs).
Plastic valve (
c
)
MDD controlling
•
Honey extractor’s legs (
b
)
Manual
Guarantee
The list of assembling elements:
Leg fixing:
f. screw for screwing the handle to cover - 1pc
g
. handle to lift the lid
– 1 piece
h
. lid hinge
– 4 pcs
i.
screw 4,2x19
– 16 szt
j. washer extended to hold the nuts
Plexiglas
– 8 pcs
k. nut for conical Allen bolts for
Plexiglas and beam M5
– 16 pcs
Controller fixing:
l.honey extractors control unit
I1. Cap nut M8
– 2 pcs
I2. washer 8
– 2 pcs
I3. Bolt M8x25-2 pcs
a.leg fixing knob - 6 spcs
b. screw for knob 118x20
c. legs
– 3 pcs
d
. valve
Lid fixing:
e. Upper lid made of Plexiglas with five orifices - 1
pc
f.
e1. Rear lid made of Plexiglas with four orifices
Assembling the Basic-series honey
extractor with electric drive
1.
Take the drum with installed engine out of
the carton box
2.
Take out the elements for self-assembling
3.
Assemble the legs and the valve
4.
assemble the Plexiglas
5.
assemble the controlling unit
