Honey extractor dimensions and weight:
• height -1100mm
• width - 900mm
• length - 730mm
• weight - 45 kg
3.3.
Honey extractor basket disassembly
•
unscrew the upper beam (4) with the black knobs
(3) together with the drive (5) and covers (1)
•
pull out the basket (7)
•
clean the honey extractor
•
put the basket (7) back into the drum (9)
•
mount the beam with drive and covers
4. Honey extractor storage
After completion of the honey harvesting, the machine
should be thoroughly cleaned and dried.
Before operating the honey extractor, if it has been
moved from a room with a lower temperature to a room
with a higher temperature, wait until it reaches the
ambient temperature. Store in dry rooms above 0º C.
The honey extractor should not be turned on when the
room temperature is lower than 5ºC.
Before each season, an additional technical
inspection should be carried out and in the event of a
fault, please contact the repair service.
5. Maintenance and cleaning of the
honey extractor
IMPORTANT !!!
Wash the machine's covers with soap and water at
25°C.
ATTENTION!!!
Do not use products containing ALCOHOL for
cleaning (causes cracks and microcracks in
plexiglass)
Pull the mains plug out before starting
maintenance work!
The honey extractor must be thoroughly washed
before the first spin and after completion of honey
harvesting. When washing, take special care to avoid
getting the engine and the controller of the honey
extractor wet (they can be covered with waterproof
material during washing). After washing, the honey
extractor should be rinsed thoroughly with clean
water and dried. Before each season, an additional
technical inspection should be carried out and in the
event of a fault, please contact the repair service.
6. Disposal
The used product is subject to the obligatory waste
disposal in the local selective Electric and Electronic
Waste Collection Points. The consumer has the right
to return used equipment in the network of an
electrical equipment distributor, directly and at least
free of charge, provided that the returned device is of
the correct type and performs the same function as
the newly purchased device.
7. Warranty
Products purchased from "Lyson" are covered by the
manufacturer's warranty.
The warranty period is 2 years.
A receipt or VAT invoice is issued for the purchased
products.
Warranty details available at: www.lyson.com.pl
