© 2016 Lytx, Inc. – Confidential & Proprietary
11
INSTALLATION PROCEDURE
Thoroughly Clean and Dry the Glass
The following steps describe installation using the
windshield-mounting bracket. This is the most common
installation method and applies to most sedans and light
vehicles with sloped windshields and standard rear view
mirrors.
Unless the vehicle manufacturer or legal restrictions
require otherwise, Lytx’s recommended location on the
windshield is a position directly behind the rearview mirror on the passenger side of the vehicle.
Before selecting the proper locations, always consult the vehicle manufacturer’s
recommendations and any applicable federal, state, provincial and local laws that prohibit
mounting devices on a vehicle’s windshield or other locations in a vehicle.
Step 1: Select a location on the windshield behind the rear view mirror on the passenger side
of the vehicle, subject to any vehicle manufacturer’s guidelines, or any applicable
federal, state, provincial or local laws that prohibit mounting devices on a vehicle’s
windshield or other locations in a vehicle.
Step 2: Using the alcohol wipe provided, thoroughly clean the mounting area.
Step 3: Using a clean, dry cloth, thoroughly dry the mounting area.
Carefully Select a Mounting Location
The event recorder needs to be mounted in a location that provides an unobstructed view of the interior
and exterior (front) of the vehicle.
The interior-facing lens should capture a view from the outside shoulder of the driver to the outside
shoulder of a front seat passenger.
The exterior-facing lens should capture a clear view of everything in front of the vehicle, beginning as
close to the front of the vehicle as possible without cutting off the horizon.
CAUTION: This step is critical to prevent the
bracket from falling off later.
CAUTION: An improperly positioned event
recorder can reduce the effectiveness of the program.
