Page 31 of 44
©2018 Lytx, Inc. - Confidential & Proprietary.
2. Launch the Lytx Installation Tool and follow the instructions and prompts. Ignition and
the vehicle J1939/J1708 connection (via engine RPM) can be verified with this
program.
3. After completion, disconnect the micro USB cable.
Camera Measurements
While testing in the Lytx Installation Tool, you must take and enter the measurements below.
Measurements must be entered in whole centimeters (cm).
Tip: If you're measuring in inches (in), convert to cm using: # of in x 2.54 = # of cm. Convert
any fractional inches to decimal first before calculating the cm.
1. Vehicle Width: Distance between the outer sides of the
front tires.
2. Camera Offset: Distance from centerline of windshield
to the center of the forward-facing lens.
a. Typically, the centerline is marked along the top of
the glass. If it isn't, measure the entire windshield
first and use the midpoint as the centerline.
b. If the camera is to the right of center, record it as a
positive number. If the camera is to the left of
center, record it as a negative number.