d
4
1
2
4
front view
top view
PUSH BUTTONS
CURTAIN POSITION
Quickly double-click the push button within 1 second to show the visible spots, and then adjust the tilt angle
(range: 0 to +5°) with the screwdriver until the visible spots are at the correct position.
Recommended position for the visible spots:
If 2 m mounting height: d≥4cm
If 3 m mounting height: d≥5cm
If 4 m mounting height: d≥6cm
If 5 m mounting height: d≥7cm
VISIBLE SPOTS
ADJUSTMENTS & SETTINGS
Quickly press the push button twice to activate the visible spots, they will help you position the curtain.
Quickly double click
to activate or deactivate the visible laser spots.
Press for 2 seconds
to launch a safety field teach-in process.
Press for 3 seconds
to confirm the setting after changing the DIP switch.
Press for 5 seconds
to acknowledge the 6x flashing error message and confirm that you want
the sensor to be mounted higher than 4m. Note that installation height
higher than 4m, the test body CA (EN16005) might not be detected.
Do not look directly into the visible beams!
FACTORY VALUES
