IMPORTANT SAFETY INFORMATION
subjected to damage or stress.
9. An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in a risk of fire and electric shock. If an
extension cord must be used, make sure:
a. That pins on the plug of the extension cord are the same number, size and
shape as those of the plug on the power supply.
b. That the extension cord is properly wired in good condition.
c. That the wire size is large enough for AC ampere rating of unit.
10. DO NOT operate unit with a damaged cord or plug. Replace the damaged cord
immediately.
11.
DO NOT operate this product in an explosive atmosphere unless it has been
specifically certified for such operation.
12. To reduce risk of electric shock, unplug unit from outlet before attempting any
maintenance or cleaning.
13. DO NOT operate this product with covers or panels removed.This unit does not
contain any user serviceable components.
14. Use only fuses of the correct type, voltage rating and current rating as specified in the
parts list. Failure to do so can result in fire hazard.
15.
GROUNDING AND AC POWER CORD CONNECTION
- To reduce risk of
electrical shock use only a properly grounded outlet. The unit is equipped with an
electric cord having an equipment - grounding conductor and a grounding plug. Be
sure the outlet is properly installed and grounded in accordance with all local codes
and ordinances.
16.
DANGER
- Never alter the AC cord or plug. Plug into an outlet properly wired by a
qualified electrician. Improper connection or loss of ground connection can result in
risk of an electrical shock.
17. The Model 19A149978P2 is for use on a circuit having a nominal rating of 230 VAC
and is factory equipped with a specific electric cord to permit connection to an
acceptable electric circuit. A plug meeting local electrical codes must be supplied by
the customer. Make sure the unit is connected to an outlet having the same
configuration as the plug. No adapter should be used with this unit.
NOTE
A ferroresonant power supply is designed to work specifically at a given frequency.
The 60 and 50 Hz supplies should be used at their nominal frequency ±2 Hz.
6
LBI-38551D
Summary of Contents for P5100 Series
