54
11.4 INSTALLATION INSTRUCTIONS FOR REMOTE
MOUNT DUAL CONTROL UNITS
Figure 11-9: M7100 Dual Control Unit Remote/Remote Mount
Installation Configuration
1. Referring to Figure 11-9, run the Remote Control Cable (CA101288V4)
between locations for the Radio Unit and Main Control Unit.
2. Run the Dual Control Cable (19B802554P9 – see Figure 11-8) between
locations for the Radio Unit and Auxiliary Control Unit. Be sure to locate
the P2/P3 connector assembly at the radio unit.
3. After installing the Radio Unit in the normal fashion, connect the dual
control cable connector (P3) to the Radio Unit. Tighten the two
jackscrews on P3. Next, connect the Remote Control Cable connector
(P1) to the Dual Control Cable connector (P2), and tighten jackscrews on
P2.
4. After installing the Main Control Unit in the normal fashion, connect the
Remote Control Cable (P2) to the Main Control Unit, and tighten
jackscrews.
5. After installing the auxiliary control unit in the normal fashion, connect
the Dual Control Cable (P1) to the Auxiliary Control Unit, and tighten
jackscrews.
Summary of Contents for P5100 Series
