MM23772, Rev. F
66
METHOD 2:
(P7270, P7250, and P5250 model radios)
From keypad: If group selection is
programmed as the primary function of
and
select a group by pressing
or
to scroll through the group list. The display registers the new group
name on line two.
METHOD 3:
(P7270 model radios)
Direct Access: Press
to enter the group select mode.
Press the numeric key mapped to the desired group. Press
.
The radio will
move to the selected group.
METHOD 4:
(P7230 model radios only)
If programmed for groups, press the
button to
change groups. The display registers the new group name on line two. If
programmed for channels, press the
button to change the channel. The
display registers the new channel.
9.11 MODIFY SCAN LIST
9.11.1
P7270 Model
1.
Press
to toggle scan OFF and verify
is
not
displayed.
2.
Select group or channel.
3.
Press
once to remove group or channel from list.
4.
Press
once to add as a normal group or channel.
5.
Press
twice to add as a Priority 2 group.
6.
Press
three times to add as a Priority 1 group.
7.
Press
to re-start scanning.
9.11.2
P7250 and P5250 Models
1.
Press
to toggle scan OFF and verify
is
not
displayed.
2.
Select group or channel.
3.
Press
once to remove group or channel from the list.
4.
Press
once to add as a normal group or channel.
5.
Press
twice to add as a Priority 2 group.
6.
Press
three times to add as a Priority 1 group.
7.
Press
to re-start scanning.
