4
AV32.1 Subwoofer
1.
Gain:
Adjusts the overall output volume for the subwoofer and speakers. Press this
knob to temporarily bypass the subwoofer.
2.
Optical In:
Use an optical cable (sold separately) to connect to an optical source.
3.
RCA Inputs:
Use an RCA cable (sold separately) to connect to an RCA source.
4.
1/4” (6.3 mm) Inputs:
Use 1/4" (6.3 mm) cables (sold separately) to connect an
external sound source.
5.
Speaker Wire Output:
Connect the included speaker wire from the speaker wire
output to the speaker wire input of the AV32.1 satellite speakers.
6.
Power Switch:
Use this switch to power the subwoofer and satellite speakers on
or off.
7.
Voltage Selector:
Change this setting only when necessary (e.g., when traveling to
a country or region with a different voltage). Selecting an improper voltage setting
can damage the unit.
8.
Power Cable Input (IEC):
Insert the included power cable here.
AV32.1 Remote
1.
Standby:
Press this button to switch the speakers and subwoofer from “Standby” to “On”
or “On” to “Standby” (if the power is switched on).
2.
Sub Bypass:
Press this button to temporarily bypass the subwoofer (i.e., if you are
checking how the mix sounds).
3.
Vol+:
Increases all speakers volume.
4.
Vol-:
Decreases all speakers volume.
1
2
3
4
1
2
3
5
4
6
7
8
Summary of Contents for AV32.1
