23
Appendix (English)
Technical Specifications
Type
2-way near-field studio reference monitors
LF Driver
5-inch (127 mm) Kevlar curved cone with high temperature voice
coil and damped rubber surround. Magnetically shielded
HF Driver
1-inch (25 mm) magnetically shielded natural silk dome
Frequency Response
56 Hz – 22 kHz
Crossover Frequency
2.8 kHz
LF Amplifier Power
40 W
HF Amplifier Power
30 W
Signal-to-Noise Ratio
100 dB typical A-weighted
Input Connectors
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Polarity
Positive signal at + input produce outward LF cone displacement
Input Impedance
20 K
Ω
balanced, 10 K
Ω
unbalanced
Input Sensitivity
85 mV pink noise input produces 90 dBA output SPL at 1 meter
with volume control at maximum
Protection
RF interference, output current limiting, over temperature, turn-
on/off transient, subsonic filter, external mains fuse.
Indicator
Power on/off indicator on rear panel
Power Requirements
Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or
100 V ~50/60 Hz
Cabinet
Vinyl-laminated high-acoustic-efficiency MDF
Dimension
(height x width x depth)
9.8" x 6.9" x 7.9"
250 mm x 176 mm x 200 mm
Weight
(without packing)
11 lbs.
5.0 kg
* Specifications are subject to change without notice.
Trademarks and Licenses
All other product or company names are trademarks or registered trademarks of their
respective owners.
Summary of Contents for BX5 Carbon
Page 2: ......
