background image

Contents 

FCC Class B/CE Compliance  ...................................................................... 3
Introduction ................................................................................................... 4
What’s In the Box  .......................................................................................... 4
Quick Start ...................................................................................................... 5
About the DMAN 2044 ................................................................................. 5
DMAN 2044 Features  ................................................................................... 5
System Requirements  ................................................................................... 6
Hardware Installation ................................................................................... 6

Card Installation ..................................................................................... 6
Audio Break-Out Cable Installation .................................................... 7
Making External Connections to the DMAN 2044 ............................ 7
Configuring DMAN 2044 Input Gain  ................................................. 9

Software Installation  ................................................................................... 10

Windows 95 Driver and Utility Installation ..................................... 10
Windows 98 Driver and Utility Installation ..................................... 10
Verifying the Software Installation .................................................... 10

DMAN 2044 Operation  .............................................................................. 14

Multi-Port Device Operation .............................................................. 14
Hardware Mixer Operation  ................................................................ 15
Windows Playback Mixer  ................................................................... 16
DMAN 2044 Audio Settings Property Page ..................................... 17
Windows Multimedia Properties ....................................................... 18
Windows Sound Recorder  .................................................................. 18
Using Advanced 3rd Party Applications  .......................................... 19

Mac Installation  ........................................................................................... 20

Sound Manager Driver Installation.....................................................20
Changing Sample Rates ........................................................................21
Replacing an older driver .....................................................................21
ASIO Driver installation .......................................................................22
For Cubase 3.xx ......................................................................................23
Cubase 3.xx Switching between input pairs ......................................23
Changing sample rates..........................................................................24
For Cubase 4.xx ......................................................................................24
Cubase 4.xx switching between input pairs.......................................24
Changing sample rates..........................................................................25

About Digital Recording  ............................................................................ 25

Digital Recording Do’s and Don’ts .................................................... 26
Choosing and Audio Format .............................................................. 27

Troubleshooting Resource Conflicts  ......................................................... 27

DMAN 2044

™ 

M A N U A L

1

Version 2044-070799

Summary of Contents for Dman 2044





































Reviews: