Chapter 4: Edit Mode
10
Keystation Mini 32 User Guide
To assign the Octave “+” and “-” buttons to the Transpose function:
1
Press the Edit button. The Edit button light will illuminate to full brightness.
2
Press the “DATA = TRANSPOSE” key, (D#, 2nd black key from the left).
The keyboard exits Edit Mode as soon as the “DATA = TRANSPOSE” key is pressed, and the Edit light will re-
turn to half brightness.
3
Press the “+” key and you will hear the pitch of the note you get higher. Press the “-” key and you will hear
the pitch get lower.
4
Press both “+” and “-” together to cancel Transpose and return Transpose to zero.
Program Change
Program Changes are used to change the instrument or voice you are using. For example, you could use this
function to change the instrument to a bass sound. To do this, you need to send a program change message
of 32, which selects an acoustic bass sound from the General MIDI Instruments list in Appendix B, “General
MIDI instruments” on page 28.
You can send a program change by:
• Sending and Incremental or Decremental program change using the Octave/Data buttons in conjunction
with the “Data=Program” key, which lets you step through each program number in either direction. If
your MIDI hardware or software can receive MIDI Program changes, the buttons will increment or dec-
rement between 0 and 127
– or –
• Entering the program number using the numerical keys (0 - 9) in conjunction with the “PROGRAM” key
on your Keystation Mini 32.
Both methods are explained below:
To send Incremental or Decremental Program Change messages:
1
Press the Edit button to engage Edit Mode. The Edit button light will illuminate to full brightness.
2
Press the “Data=Program” key, which is the black key above F (F#, 3rd black key from the left).
3
The Edit Mode button will return to half brightness as soon as the “Data=Program” key has been pressed.
4
Press the Octave/Data “+” or “-” button to step upwards or downwards through the sounds while con-
tinuing to play notes, until you find the instrument you want to use.
The DATA=TRANSPOSE assignment is retained when the keyboard is turned off.
CA
N
C
E
L
Panic
P
B
Rate
V
elocity
Sust
ain Mode
Default
0
1
2
3
4
5
6
7
8
9
EN
T
E
R
Dat
a = Oct
acve
Dat
a = T
ranspose
Dat
a = Program
Dat
a = B
ank L
S
B
Dat
a = B
ank M
S
B
Dat
a = Channel
Dat
a = T
uning
Program
B
ank L
S
B
B
ank M
S
B
Mod Assign
P
B
Assign
K
nob Assign
Mod Rate
