4
1
Getting Started
Welcome to the NRV10 interFX User Guide.
The NRV10 interFX software is an audio
processing application designed specifically for the NRV10 Mixer, greatly expanding its
audio processing capabilities.
Typically, you will use NRV10 interFX in a live situation,
when you want to add more effect processing to microphones and/or other audio
sources plugged into the NRV10 Mixer.
The channel configuration of NRV10 interFX is
identical to the NRV10 Mixer, providing four mono channels and two stereo channels.
Due to this configuration, there is no need to configure the inputs and outputs of NRV10
interFX.
After launching the software, simply use the per-channel Expander-Gate and
Compressor, and choose up to two user-definable VST effects per channel.
1.1
Check for the Latest Update
To ensure that you have the most recent version of NRV10 interFX, choose
“
Check for
Updates
”
from the
Options Menu
of the NRV10 interFX software (press the
Options
Button
). This action opens the NRV10 interFX update page of the Audiffex website.
Before downloading and installing the update, press the
Options Button
, choose
“
Help,
”
and then
“
About.
”
Compare the version number reported by the
About Dialog
with the version number listed on the Audiffex website. If the version numbers match,
you do not need to update NRV10 interFX.
1.2
A Tutorial on Working with the NRV10 interFX
Software:
Below is a tutorial that describes the typical workflow of NRV10 interFX.
This tutorial
assumes that the
driver
of
the NRV10 Mixer is installed, and that the NRV10 Mixer is
connected to your computer:
1.2.1
Preparing the NRV10 Mixer for Use with NRV10
interFX:
To use the NRV10 Mixer with NRV10 interFX, ensure
that
the
Pre EQ/Post EQ
button
of
the
NRV10
Mixer is pushed out/up before launching NRV10 interFX.
If this
button is pushed in/down when using NRV10 interFX, you will experience feedback.
In
addition, ensure that the CH/FW buttons at the top of each channel of the NRV10 Mixer
are pushed in/down.
This sends the signal from each channel of the NRV10 Mixer to
the associated channel of the NRV10 interFX software.
NRV10 interFX then outputs the
processed signals to the related channels of the NRV10 Mixer.
In this way, NRV10
