control room outputs and two headphone outputs, all with independent level
controls. A separate “mix” out provides an independent feed to your mixdown
deck. Ultimately, your individual and master volume levels will be controlled by
your music software and/or Delta Monitor Mixer, and therefore can be saved
into the computer’s memory for each recording project.
The Omni I/O takes advantage of computer-based recording and combines it
with proven M Audio pre-amp and mixer technology to bring you an extremely
powerful desktop recording solution. Incorporate your existing gear, or do all of
your sounds and effects right inside the computer. Either way, the Omni I/O
can ultimately handle all of your signal flow from tracking to mixdown.
2. Features
2.1 Recording Section
•
2 Mic/Inst plus 2 line level balanced/unbalanced analog inputs to the Delta
44 or Delta 66 soundcard.
•
The Omni’s two Mic/Inst inputs are equipped with XLR phantom power,
insert I/O jacks, individual gain controls, gain reduction “pad” switch, and
signal/clip indicator LEDs.
•
Low impedance mic inputs provide 66dB of gain and utilize M Audio’s
critically acclaimed DMP2 pre-amp technology. They are switchable to hi-
impedance instrument inputs with 46dB of gain, ideal for electric/acoustic
guitars.
•
The Omni Mic/Inst pre-amp has a frequency response of 10Hz to 200kHz,
low THD of .0009%, with a dynamic range of 130dB.
•
Stereo effect return.
2.2 Mixing Section (all balanced/unbalanced on TRS jacks)
•
The Delta analog outputs feed the Omni I/O ultra-quiet mixer, with the
addition of 4 stereo aux inputs for MIDI devices and 1 stereo effects return.
•
The 4 Delta analog outputs can simultaneously be used as independent
balanced/unbalanced direct outs for additional effects sends, alternate mix
outputs, or feeds to a secondary mixer.
•
Stereo Aux inputs 1 and 2 can be muted in the mixer and re-routed to the
Delta line inputs for easy audio recording of MIDI instruments or other
auxiliary inputs.
•
Mix out for recording to a mix deck.
•
Control room outs with independent level control for monitoring.
•
Two headphone outputs with individual level controls.
•
One mono effect send per Delta channel.
•
L/R output signal/clip LEDs.
3
