M-Audio OXYGEN PRO 25 User Manual Download

Page: 16 / 114

23.

Knobs (1–8):

Turn these knobs left/right to perform their assigned controls. When operating with a

DAW, the assigned controls will be predetermined. When operating with a preset

or the

User

DAW

selected, the controls can be edited.

Hold

SHIFT

while turning

Knobs 1–4

to edit arpeggiator settings.

Hold

SHIFT

and

Pads 9 – 11

to change the knob functionality in a DAW. Please note, this is not

available in all DAWs.

Important:

Both the

Faders

and

Knobs

are enabled with “soft takeover.” This means that if you switch

banks, a Fader or knob will not work until it is positioned at the current value of the newly selected
software control. For example, if you move

Fader 1

in Bank 1 and then switch to Bank 2, physical

Fader 1

will not affect software Fader 10 until the physical Fader is positioned at the current value of

software Fader 10. This feature allows you to make changes in one bank and then switch banks without
making unwanted changes to the new bank’s controls. The

Display

will show a checkered value meter

if a

Fader

Knob

needs to be moved before it can “take over” its assigned control.

Important:

In Avid Pro Tools and other Mackie/HUI controlled DAWs, stereo tracks have two panning

controls: left and right. Press the

SHIFT

button to switch the knobs between the left channel and right

channel. If the pan controls aren't moving on a mono track, press the

SHIFT

button to change pan

knob back to controlling the pan control normally.

24.

Mode button (with LEDs):

Press the

Mode

Button

to activate one of the secondary Modes for the

Function Buttons

. When the keyboard is set to operate in DAW Mode, the available secondary

Modes

for the

Function Buttons

are

Rec, Select, Mute,

and

Solo

; in these Modes, the buttons perform

predetermined DAW channel Record Arm, Track Select, Mute, and Solo functions. When the keyboard
is set to operate in Preset Mode, the available secondary Mode for the

Function Buttons

MIDI

, in

which the buttons perform MIDI controls that are predetermined in one of the custom presets.

The LEDs to the right of the

Mode Button

indicate which Mode the

Function Buttons

are in.

Hold

SHIFT

and press the

Mode

Button

to access the keyboard’s Global Settings menu.

25.

Function Buttons (1–8):

When the

Function Buttons

are set to their primary Mode, they will control

the keyboard’s internal functions, as described below:

ARP Button:

Press this button to activate the arpeggiator. Hold

SHIFT

and press this button to edit

the arpeggiator’s settings.

Latch Button:

Press this button to toggle the arpeggiator between momentary and latch Mode.

Chord Button:

Press this button to activate Chord Mode. Hold

SHIFT

and press this button to edit

the Chord Mode settings.

Scale Button:

Press this button to activate Scale Mode. Hold

SHIFT

and press this button to edit

the Scale Mode settings.

1/4–1/32T (Time Division Buttons):

Use these buttons to select the keyboard’s time division setting

for the note repeat and arpeggiator functions. Each press of one of these buttons alternates between
the standard timing listed above the button and the triplet timing listed (beneath the button). A solid
red LED shows that a standard timing is selected, while a flashing LED shows that a triplet timing is
selected.

5 6

11 12 13

14 15 16