97
Clip Buttons
To edit the functionality of a Clip button when in DAW Edit Mode, press a Clip button. You can
scroll through the available parameter values using the Encoder. Select what parameter you
would like to edit by pressing the Encoder.
Note:
What some parameter values are set to will affect what parameters are available for
editing. For example, if the Button’s Mode parameter is changed from Note to Program, it will
change the editable parameters from Note parameters to Program parameters.
Channel:
The Clip button will send its messages over this channel. Select the global channel
(
Global
), or a specific channel (
Channel 1
–
16
).
Available Values:
Global, 1-16
Message “MESSAGE”:
•
CC
“CC”:
The Clip button will send its MIDI messages using this CC number.
•
CC Cycle
“CC CYCLE”:
The Clip button will send the value with this CC number when
you press it, one at a time, cycling through them with each press.
•
CC Inc/Dec
“CC INC/DC”:
The Clip button will send the next (Increment) or previous
(Decrement) value number in the range of values when you press it.
•
Program
“PROGRAM”:
The Clip button will send this program number when you press it.
•
Program Cycle
“PRG CYCL”:
The Clip button will send the value with this Program
number when you press it, one at a time, cycling through them with each press.
•
Program Inc/Dec
“P. INC/DEC”:
The Clip button will send the next (Increment) or
previous (Decrement) program number in the range of programs when you press it.
•
Note
“NOTE”:
The Clip button will send its MIDI messages using this Note number.
•
Mackie “
MACKIE”
: When set to Mackie Control, you can use the button with a DAW that
responds to Mackie Control mode.
•
Mackie/HUI “
MACK/HUI”
: When set to Mackie/HUI, you can use the button with a DAW
that responds to HUI mode.
When set to CC, these are the available parameters:
CC:
The Clip button will send its MIDI messages using this CC number.
Available Values:
0-127
Press:
The Clip button will send the MIDI CC number with this value when you press it.
Available Values:
0-127
Release:
The Clip button will send the MIDI CC number with this value when you release it.
Available Values:
0-127
When set to CC Cycle, these are the available parameters:
CC:
The Clip button will send its MIDI messages using this CC number.
Available Values:
0-127
Press:
The Clip button will send the MIDI CC number with this value when you press it.
Available Values:
0-127
