29
DAW Knob Control
Using the
SHIFT
button and
Pads 9-12
(on the 25-key), or
9-11
(on the 49-key and 61-key)
will enable you to change the function of knobs in DAW mode.
DAW Mode
•
Volume:
Will change the knobs function to control the channel faders in your DAW.
•
Pan:
Will change the knobs function to control the channel pan knobs in your DAW.
•
Device:
Will change the knobs function to control the currently selected channel’s plugin
controls in your DAW.
Note:
Not all DAWs support Device control.
•
Sends:
Will change the knobs function to control the currently selected channel’s send
controls in your DAW.
Note:
Not all DAWs support Sends control.
DAW Shortcuts
Using the
SHIFT
button and
TEMPO/METRO
and
Pads 13-16
will enable you to send DAW
shortcut/hot key messages:
•
METRO (Metronome):
Will send the ASCII shortcut message to turn on/off your
Metronome/Click track in your DAW.
•
Save:
Will send the Save ASCII shortcut message to your DAW to save your current
session.
•
Quantize:
Will send the Quantize ASCII shortcut message to your DAW to Quantize your
current selection.
•
View:
Will send a View ASCII shortcut message to your DAW to change your current
view.
Note:
Some DAWs may require a window to be opened for View to work properly. This
will toggle between the window being maximized and minimized.
Note:
Some DAWs will also support additional View controls. Pressing the Clip Play
buttons will offer additional view controls.
•
Undo:
Will send an Undo ASCII shortcut message to your DAW to revert your last change
in your DAW.
Note:
You can lock and unlock your DAW shortcuts to always be active by pressing
SHIFT
and
BANK >
.
ARP Knob Control
Using the
SHIFT
button and
Knobs 1-4
will enable you to change the function of knobs to
control the functions of the Arpeggiator.
Arp Knob Controls
•
Type:
Will change what order the notes will be played back in the ARP.
•
Octave:
Will change the octave range of the ARP.
•
Gate:
Will change the length of the ARP’s notes.
•
Swing:
Will change how much the ARPs Tempo will swing.
Note:
You can lock and unlock your ARP knob controls to always be active by pressing
SHIFT
and
BANK <
.
