50
Pads
To edit one of the Pads when in DAW Edit Mode, press a Pad. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel:
The pad will send its messages over this channel. Select the global channel (
Global
),
or a specific channel (
Channel 1
–
16
).
Available Values:
Global, 1-16
Color 1:
Select the primary color that you want to assign to the pad.
Available Values:
Off “
OFF”
, Chartreuse
“CHAR.”
, Green
“GREEN”
, Aquamarine
“AQUA”
,
Cyan
“CYAN”
, Azure
“AZURE”
, Blue
“BLUE”
, Violet
“VIOLET”
, Magenta
“MAGENTA”
, Rose
“ROSE”
, Red
“RED”
, Orange
“ORANGE”
, Yellow
“YELLOW”
, White
“WHITE”
.
Color 2:
Select the secondary color that you want to assign to the pad.
Available Values:
Off “
OFF”
, Chartreuse
“CHAR.”
, Green
“GREEN”
, Aquamarine
“AQUA”
,
Cyan
“CYAN”
, Azure
“AZURE”
, Blue
“BLUE”
, Violet
“VIOLET”
, Magenta
“MAGENTA”
, Rose
“ROSE”
, Red
“RED”
, Orange
“ORANGE”
, Yellow
“YELLOW”
, White
“WHITE”
.
Type “TYPE”:
•
Note
“NOTE”:
The pad will send its MIDI messages using this Note number.
•
CC
“CC”:
The pad will send its MIDI messages using this CC number.
•
Same as Preset
“PRESET”:
When set to
PRESET
, the pads will send the same message
assigned to the pads when in Preset mode.
When set to Note, these are the available parameters:
Note:
The pad will send its MIDI messages using this Note number.
Available Values:
C-2 – G8
Latch:
When set to Latch On, the pad will send one value when pressed and a different value
when pressed a second time, alternating between the two values with each press. When set to
Latch Off, the pads will send one value when pressed and one value when released.
Available Values:
On/Off
Note On:
When Latch is active, the pad will send the MIDI note number with this velocity when
you press it to turn it on.
Available Values:
0-127
Note Off:
When Latch is active, the pad will send the MIDI note number with this velocity
when you press it to turn it off.
Available Values:
0-127
When set to CC, these are the available parameters:
CC:
The pad will send its MIDI messages using this CC number.
Available Values:
0-127
