71
When set to Program Cycle, these are the available parameters:
Values:
The fader button will cycle through this many Program values (one at a time) when you
press it:
2 Values
,
3 Values
, or
4 Values
.
Available Values:
•
2 Values
•
3 Values
•
4 Values
First:
The fader button will send this Program message first when you press it.
Available Values:
0-127
Second:
The fader button will send this Program message second when you press it.
Available Values:
0-127
Third:
The fader button will send this Program message third when you press it.
Available Values:
0-127
Last:
The fader button will send this Program message last when you press it.
Available Values:
0 – 127
When set to Program IN/DC (PG IN/DC), these are the available parameters:
Type:
The fader button will send the next (
Increment
) or previous (
Decrement
) value number
in the range of values when you press it.
Min:
The lowest Program value in the range of values will correspond with this setting.
Available Values:
0-127
Max:
The highest Program value in the range of values will correspond with this setting.
Available Values:
0-127
When set to Note, these are the available parameters:
Note:
The fader button will send its MIDI messages using this Note number.
Available Values:
C-2 – G8
Latch:
When set to Latch On, the fader button will send one value when pressed and a
different value when pressed a second time, alternating between the two values with each
press. When set to Latch Off, the fader buttons will send one value when pressed and one
value when released.
Available Values:
On/Off
Note On:
When Latch is active, the fader button will send the MIDI note number with this
velocity when you press it to turn it on.
Available Values:
0-127
