15
III. INSTALLATION AND USE
- Installation.
Remove the equipment from the packaging. This comes ready for operation.
- Control panel buttons.
Press the buttons to activate the corresponding function.
1-.
Connect the equipment to the electrical network, you will hear a beep. Now the
device is in standby mode. It is only functional in the ON / SPEED button.
2-.
ON / SPEED BUTTON. When the device is in standby mode, press this button
and it will light up. It will do it in average fan speed, to pass at low speed in 3
seconds. The equipment will be running in normal speed mode and the
corresponding LED will be illuminated. Press OFF to turn off the device.
3-.
MODE BUTTON. Press this button once to change from normal mode to natural
mode. Press it again to go to sleep mode. Press it a third time to exit the ventilation
mode selection menu. The LED lights will vary accordingly.
Operation of the different ventilation modes:
- Normal mode:
High: -----------------
Half: -----------------
Low: -----------------
- Natural mode:
A
A
6 6 6
6 6
6
6 6 (s)
3
3
11
11
11
M
B
M
A
6 6 6
6
6
6
6
(s)
3
3
3
11
11
11
M
B
B
A
6
6
6
6 6
6
6
(s)
3
3
3
11
11
11
M
B
