08
5. Press the COOL button to enable / disable evaporative water cooling.
6.Press the TIMER button to program the automatic shutdown of the equip-
ment from 1 to 9 hours. Once the programmed time has been reached, the
equipment turns off and turns to standby mode. With the appliance on, press
TIMER to set the timer. The TIMER indicator will light and the display will blink
showing the selected time. Press TIMER to change the selected time. Press any
other key (except POWER) or wait 5 seconds to exit setup. With the timer set,
the display will alternately show the running speed and the set timer in 10
second intervals.
7. Press the SWING button, to activate / deactivate the automatic horizontal
oscillation of the air flow.
8. Press the LED button (remote control) to turn the display on / off. When
the display is off, the appliance functions are "locked". Press any key to turn on
the display, and then press the key of the function you wish to operate.
9. IONIZER function. It is activated automatically when you turn on the equip-
ment.
10. ICE BOX. Put the ICE BOX in the freezer to freeze, and then put it in the
water tank to lower the water temperature.
It is strictly forbidden to open and
drink the contents of the ICE BOX.
The ICE BOX can be used continuously.
Note:
1. If the equipment works for 45 seconds with low water level, it will automati-
cally stop the COOL function and emit a 10 “beep beep” alarm.
2. The equipment continuously memorizes the selected operating mode.
When you turn on the equipment, if it has not been unplugged, it will start to
operate at medium speed and after 3 seconds it will go to the last memorized
mode. The sleep mode, drying mode and timer are not memorizable.
3. Do not use any liquid other than clean water to fill the reservoir.
4. It is normal if there is a slight odor and discoloration in the tank when the
equipment is used for the first time. It is a harmless fact and does not affect
health.
