JS-MD 3 RES
Flight Manual Supplement
MD11-AFM-00-002
Issue: 02
Rev. 00
Rev. Date: 24-Mar-23
Page 3
–1
3 Inspections
Pre-Flight Inspection
Before the first flight of the day, the RES must be inspected to ensure
reliable operation. Extend the pylon using maintenance mode (see
Section 6.6) and check the following:
Propeller attachment
bolts
- Secured and safety wire intact
Propeller structure
- No cracks, delamination, or signs of
impact damage
Pylon structure
- No cracks, delamination, or signs of
impact damage
Motor bay
- Clean, no obstructions
Retraction mechanism
- All fasteners secured
Door hinges
- All connected and intact
Exhaust nozzles and
elbows
- Clear on batteries and in fuselage
Batteries
-
-
In position, secured and charged
Ensure both batteries have similar SOC
Termination plug
- Secured in battery charge socket (if
fitted)
Terminal connector
–
single battery operation
-
Secured in removed battery
’s
connection plug
Controller cooling inlet
(if air cooled)
- No blockage or obstructions
Controller liquid cooling
system (if fitted)
- No leaks observed near radiator and
tubes
Fire warning
- Circuit tested (LED illuminates and
buzzer activates)
