LUNA 1000DH/CL/CR/DC - 1150DH - 1300DH/CL/CR/DC - 1600DH/CL/CR/DC GOLD - GAS
27
9. FIRST-TIME USE
The masonry and plaster surrounding a recently installed furnace hold a great deal of moi-
sture, which must first evaporate before commissioning the appliance. If not, the plaster may
crack or split. Ask your installer about the timescale to follow. The first time you use it, only
make a moderate-sized fire.
The first few times the furnace is used, an unpleasant odour may be apparent. It comes from
the protective paintwork. These emissions are totally harmless. To quickly get rid of these
odours, all you need to do is ventilate the room for a while.
After the first few fires, a light deposit may appear on the window. It comes from the paint
-
work. Once the furnace is cold you can get rid of this deposit by using M Design’s Bio-Clean
cleaning product. This product may be used later on for cleaning the window.
The appliance must not be used if the door no longer has a window or with the door open. If
the window is broken or cracked, the appliance must not be used until the window has been
replaced. Contact your M Design reseller.
10. SAFETY, ADVICE AND MAINTENANCE
Have your furnace inspected once a year by a qualified technician.
Please observe the following points:
•
Closed appliances produce intense heat, which means that all the surfaces of the exter
-
nal walls (metal, door frames and windows) become very hot once a certain temperature is
reached. Make sure that young children do not touch the window; this could result in severe
burns.
•
The logs, ceramic pebbles, a Diamond set and a Sapphire set are delivered with the
furnace. Never put other objects in the flames!
•
Keep inflammable materials a suitable distance from the furnace (min. 1m)!
•
Never modify the settings yourself! The furnace warranty will then be considered as
invalid, null and void.
•
Never let children use the remote control without supervision.
•
Always leave the pilot light on. The appliance is designed in order that the pilot light
goes out automatically every 24 hours and lights instantly. This enables the electronic system
to run down from static electricity.
•
In the case where the burner goes out for any reason, wait for 3 minutes before religh
-
ting the furnace.
Summary of Contents for LUNA 1000 CL Gold Gas
Page 22: ...LUNA 1000DH CL CR DC 1150DH 1300DH CL CR DC 1600DH CL CR DC GOLD GAS 22 LUNA 1150 DH GAS 6 7 ...
Page 43: ...LUNA 1000DH CL CR DC 1150DH 1300DH CL CR DC 1600DH CL CR DC GOLD GAS 43 ...
Page 46: ...LUNA 1000DH CL CR DC 1150DH 1300DH CL CR DC 1600DH CL CR DC GOLD GAS 46 15 CE CERTIFICATION ...
Page 47: ...LUNA 1000DH CL CR DC 1150DH 1300DH CL CR DC 1600DH CL CR DC GOLD GAS 47 ...
