M Design Luna Diamond 1000CL, Instructions For Installation And Use Manual

24

Instructions for installation and use DIAMOND Gas DH-CL-CR-DC

9. First-time user

The masonry and plaster surrounding a recently installed appliance holds a great deal 
of moisture, which must first evaporate before commissioning the appliance. If not, the 
plaster may crack or split. Ask your installer about the timescale to follow. The first time 
you use it, only make a moderate-sized fire.
The first few times the appliance is used, an unpleasant odour may be apparent. 
It comes from the protective paintwork. These emissions are totally harmless. To 
quickly get rid of these odours, all you need to do is ventilate the room for a while.
After the first few fires, a light deposit may appear on the window. It comes from the 
paintwork. Once the appliance is cold you can get rid of this deposit by using M De-
sign’s Bio-Clean cleaning product. This product may be used later on for cleaning the 
window.
The appliance must not be used if the door no longer has a window or with the door 
open. If the window is broken or cracked, the appliance must not be used until the 
window has been replaced. Contact your M Design reseller.

10. Safety, device and maintenance

Have your appliance inspected every 2 years by a qualified technician.
Please observe the following points:

•Closed appliances produce intense heat, which means that all the surfaces of the 
external walls (metal, door frames and windows) become very hot once a certain 
tempera-ture is reached. Make sure that young children do not touch the window; this 
could result in severe burns.

•The logs, ceramic pebbles, a Diamond set and a Sapphire set are delivered with the 
appliance. 

Never put other objects in the flames!

•Check that there is nothing on the ignition pin and that the imitation coal does not lie 
on the small openings of the burner. When starting up, make sure you see the ignition 
sparks.

•

If after 2 attempts the device does not start up, wait 15 minutes before restart-

ing, or open the window to attempt to start up. If this does not work, please 
contact the dealer and not try to get the device started.

•Keep inflammable materials a suitable distance from the appliance (min. 1m)!

•Never modify the settings yourself! The furnace warranty will then be considered as 
invalid, null and void.

•Never let children use the remote control without supervision.

•If the burner goes out for any reason, wait at least three minutes before lighting the 
appliance again. Open the window to vent the fireplace.